HQ AVSWITCH- 80 Mode D'emploi page 4

Connections and Operation:
• The AVSWITCH-80 is equipped with 2*HDMI, 2*VGA and 2*analog
input connections.
• For each analogue video connection, you can choose to connect
Composite Video, S-video or Component Video. A RCA audio input
can be used as the audio input of Composite, S-video or Component.
• The VGA input only support VGA video to HDMI video conversion. If
you need audio, please connect a speaker or other sound device to
the audio output of your VGA sources (computer, laptop, TV box, or
IPTV box)
• Connect the HDMI cables from your displays (monitor or projector) to
the outputs of the AVSWITCH-80.
• Connect the input sources to the AVSWITCH input connection. (You
can connect 2x HDMI, 2x VGA and 2 Analogue devices).
• Plug the power adaptor to an AC power outlet. Plug the 5VDC power
adapter into the DC jack.
• Turn on the power of your source device that you are going to use.
• Check the power of AVSWITCH-80. If the power LED light is not on,
please press the power key to turn on the power of AVSWITCH-80.
• Check the input indication LED at the front panel. Please press the
button of input source to choose input source. For example, if your
are going to choose HDMI input 1, please press the key with "1" in the
HDMI
4