Synchronism Output, Vertical Pulse And Horizontal Pulse; R-G-B/ Y P; B P R Output; S-Vhs Output (Analog). S-Vhs Input (Mpeg2) - Promax GV-998 Manuel D'utilisation

5.5 Synchronism output, vertical pulse and horizontal pulse

The GV-998 has three synchronisms outputs situated on the rear panel: CS [36]
composite synchronism output (horizontal and vertical), V [37] vertical synchronism
output, and H [38] horizontal synchronism output. Synchronism polarity may be
selected from the SYNC-LOGO-SCART configuration menu.

5.6 R-G-B/ Y P

B
The R-G-B/Y P
sockets R P [39], G Y [40] and B P
R
By means of the SYNC-LOGO-SCART configuration menu, it is possible tu
insert synchronisms in the G/Y output and selectioner RGB or YP

5.7 S-VHS output (ANALOG). S-VHS input (MPEG2)

This is via the 4-contact socket
Separate luminance and chrominance outputs used in the S-VHS system are
available. Their use as a high quality video standard is becoming more and more
widespread and the quantity of television sets and video equipment incorporating them
is increasing. It is used as input to convert a S-VHS signal to MPEG2.
[1] Luminance signal ground
[2] Chrominance signal ground
[3] Luminance signal
[4] Chrominance signal
Page 34
P output
R
P outputs are situated on the rear panel, through three BNC
B R
[41], respectively.
B
Figure 9.- S-VHS socket
Colour pattern generator GV-998
B
[43] on the rear panel.
P output.
R
12/2004