Promax GV-998 Manuel D'utilisation page 78

[15] Selection of pattern nº 5: PURITY. By pushing this chart key cyclically it is
possible to select between three different charts:
• Complete picture of red signal.
• Complete picture of blue signal.
• Complete picture of green signal.
[16] Selection of pattern nº 6 : DEM
PAL system
• 5 vertical bars. White level 50%.
Colour signals from left to right
R-Y (90°/90°), B-Y=0.
B-Y (0°/180°), R-Y=0.
B-Y (180°/0°), R-Y=0.
R-Y (270°/270°), B-Y=0.
R-Y=0, B-Y=0.
SECAM system
• Colour bars 100/0/75/0
NTSC system
• SMPTE3 signal
[17] Selection of pattern nº 7: Multi-burst. By pushing this chart key cyclically it is
possible to select between two different charts:
B/G/I/L/D/K systems
• White (100%) and black bars.
6 blocks of 0.5 / 1.0 / 2.0 / 4.0 / 4.8 / 5.8 MHz 100% of the white level.
Sinusoidal signals
• VITS line CCIR18
M, N systems
• White (100%) and black bars.
6 blocks of 0.5 / 1.0 / 2.0 / 3.0 / 3.58 / 4.2 MHz 100% of the white level.
Sinusoidal signals
• VITS line FCC MULTI-BURST
[18] Selection of pattern nº 8: Pluge
[19] Selection of pattern nº 9: Sin X/X
[20] Selection of pattern nº 10: Ramp
[21] Selection of pattern nº 11: Checkerboard
Page 24
Colour pattern generator GV-998
12/2004