Light Replacement - Franke Imagine FIM/2 900 W XS Mode D'emploi Et Installation

MAINTENANCE
CLEANING METAL SELF- SUPPORTING GREASE FILTERS
•
more frequently for particularly heavy usage, and can be
washed in a dishwasher.
•
hand and pulling the handle downwards with the other hand
at the same time.
•
•
on the outside.
• Indication of saturation of the metal grease filters and reset of
the 200 hours timer (See chapter USE control G)
REPLACING THE ACTIVATED CHARCOAL FILTER
•
be replaced approximately every 4 months of operation, or
more frequently for particularly heavy usage.
•
•
Fit the new by hooking it into its seating.
•
•
• Indication of saturation of the charcoal filters and reset of
the 400 hours timer (See chapter USE control G)
Remote control (Otional )
The appliance can be controlled using a remote control powered
by a 1.5 V carbon-zinc alkaline batteries of the standard LR03-
AAA type.
• Do not place the remote control near to heat sources.
• Used batteries must be disposed of in the proper manner.

LIGHT REPLACEMENT

• Remove the metal cover (2 or 4 screws).
• Remove the lamp housing gently (2 screws).
• Replace the lamp with a new one of the same type, making
sure that you insert the two pins properly into the housings
on the lamp holder.
• Replace the lamp housing and then the metal cover.
GB
Lighting
G4 20 W 12 V
9