ab Naida CI Q90 Mode D'emploi page 35

To attach an FM/Roger Receiver to the ComPilot:
With the ComPilot turned off, hold the
ComPilot in one hand. With the other hand,
align the three connector pins with the
Europort on the ComPilot. Take care to ensure
that the FM/Roger receiver pins match the
size and orientation of the holes on the
ComPilot. Failure to do so may cause damage
to the FM/Roger receiver and/or the ComPilot.
Adjust the program position on the processor or AB myPilot to the desired program for
3
FM/Roger use.
Reduce volume settings.
4
Turn on the ComPilot.
5
Adjust the volume to the desired level for FM use.
6
To remove an FM/Roger receiver:
With the ComPilot turned off, hold the
ComPilot in one hand.
Readjust the program position and volume to their desired settings for non-FM/Roger use.
3
For further information regarding FM/Roger use, refer to the
FM/Roger system.
34
Naída CI Q90 Sound Processor User Guide
1
1
Firmly press the FM/Roger receiver
into place on the ComPilot.
With the other hand, gently pull the FM/
Roger receiver straight out of the Europort.
Instructions for Use
2
2
included with the