User Interface - MAHLE ACX150 Manuel D'utilisation

EN | 11 | ACX150/250 | Product description
DO NOT USE THE UNIT
UNLESS
HOSES
CORRECTLY CONNECTED
Fig. 2: Rear view (detail)
Fan
1
Vents
2
1
2
3
Fig. 3: Right-front view (detail)
Power cord connector and
1
Power switch
USB type B (Device port to PC)
2
USB type A (Host port to USB
3
Memory Stick)
The USB type-A connector
can only be used with USB
2.0 portable memory devices
with Mass storage service for
reports export and station
update, or for connection to
MAHLE refrigerant identifier.
Do not connect other types
© MAHLE
THE CHARGING
(HP – LP) ARE
1
2
of devices, such as USB
keyboards or other units.
Fig. 4: Display and operating unit
High-pressure gauge
1
Low-pressure gauge
2
LCD Display with Touch screen
3
Printer
4
The pressure gauges (Fig. 4, Pos. 1, 2)
of the display and operating unit are
used to monitor the pressure during the
individual vehicle A/C service phases.
The status of the various service phases
during maintenance is displayed on the
multicolor LCD screen (Fig. 4, Pos. 3).
The menu selection and the necessary
entries are made by way of the touch
screen (Fig. 4, Pos. 3) integrated in the
LCD display. MAHLE supplies a USB
stick for updating the ACX150/250
software. If required, the USB stick can
be inserted in the USB type A socket
(Fig. 3, Pos. 4) to perform updating of
the firmware/software.
5.4

User interface

All settings, controls
functions are available on the touch
screen display. It also displays the service
equipment's status, the progress of A/C
system service and any alarms and error
messages.
and service