4 Operation
4.1
Light intensity
4.1.1
Range
0 %
4.1.2
Control
Remotely with DMX512-A protocol
Light output is the highest value of DMX512 command or local control
Focus mode : when standby display 1/6 DMX CONFIG.
4.1.3
Parameters
Resolution:
Smoothing
Mode
Slow
Fast
Without
Dimming mode (FLICKER MODE):
Mode
PWM dimming (Pulse With Modulation) – Frequency : 23.8kHz
PWM
Constant current driving
FREE
0 20% : PWM dimming (Pulse With Modulation) – Frequency : 23.8kHz
MIXTE
20 100% : Constant current driving
DMX512-A
DMX Console
HTP mode (Highest Takes Precedence):
Push Exit Light output = 100% for 1 minute
2x times Exit Light output = 0%
Mode
8 bits
65 535 steps – 2 DMX channels
16 bits
Slow transition between 2 levels – equivalent to 1000W filament
Fast transition between 2 levels – equivalent to 600W filament
Deactivated – Very fast transitions
Accurate dimming
No flicker but less accurate on lower levels – LED switch on at 20% only
- 12 -
100 %
Locally
Resolution
255 steps – 1 DMX channel
Smoothing
Dimming
EN