Functions; Error Indication - Steba KB E350 Mode D'emploi

Functions

Ferment / Yoghurt
Default setting: 36°C, lower heat, 1 h
Modifiable scope: 35 – 45°C, 1 Min – 10 h
Press the menu button and choose the program "Ferment".
To change the default settings:
∙ Press the temperature button and set the desired temperature from 35 to 45°C by
using the setting buttons.
∙ Press the timer button once to set the minutes from 1 to 60.
∙ Press the timer button twice to set the hours from 1 to 10.
∙ Then, press the start button.
Bread
Press the menu button and choose the program "Bread". Then, press the start but-
ton.
The device starts fermenting with 36°C for 30 minutes. After that, the device auto-
matically switches to the default program "Bread" with 165°C for 60 minutes. The
timer starts to count down when the temperature is reached. During operation, the
program can not the changed.
If an additional baking time or temperature is needed after the program is finished,
the time can be changed from 1 Min. to 2 h and the temperature from 150 to 200°C.
∙ Press the menu button and choose upper / lower heat or lower heat.
∙ Press the temperature button and choose the temperature with the setting but-
tons.
∙ Press the time button and choose the time with the setting buttons.
∙ Then, press the start button.
Defrost
Press the menu button and choose the program "Defrost". Then, press the start but-
ton.
The default setting is 30 min. and 60°C. The time can be changed from 1 Min. to 2 h.
∙ Press the time button once to change the minutes from 1 to 60 minutes.
∙ Press the time button twice to change the hours from 1 to 2 hours.
∙ Then, press the start button.

Error indication

E1 Short circuit of upper temperature sensor
E2 Interrupted circuit
E3 Short circuit of lower temperature sensor
E4 Interrupted circuit
26