Additional Information; Automatic Cut-Out; Disposal Information - Dyson pure hot+cool Guide D'utilisation

Additional information

CONTROL WITHOUT REMOTE
• The appliance can be controlled through your Dyson Link app.
DYSON LINK APP CONNECTIVITY
• You must have a live Internet connection in order for the Dyson Link app to work.
• The appliance can connect to either 2.4GHz or 5GHz networks which includes most
modern routers. Check your router documentation for compatibility.
• The Dyson Link app requires an iOS device with at least iOS version 10* or an Android
device with at least Android version 5.
• Your mobile device must have Bluetooth
wireless technology Low Energy) in order to set up a connection with the appliance.
Check your device specification for compatibility.
Supported Wi-Fi protocols:
– IEEE802.11a
– IEEE802.11b (Not recommended)
– IEEE802.11g
– IEEE802.11n
REPLACEABLE PARTS
BATTERY REPLACEMENT
CAUTION
• Unscrew the battery compartment on the remote control. Loosen the base and pull to
remove the battery.
• Do not install backwards or short circuit the batteries.
• Do not attempt to dismantle or charge the batteries. Keep away from fire.
• Follow battery manufacturers' instructions when installing new batteries
(battery type CR 2032).
• Always replace the screw in the remote control and refer to the battery hazard in the
warning section.
20
wireless technology 4.0 support (Bluetooth
®
NON-WASHABLE FILTER UNITS
• Your filter units are non-washable and non-recyclable.
• Failure to replace the filter units when prompted may result in changes to product
performance and appearance.
• Order new filters on the Dyson Link app or www.dysoncanada.ca. Your new filters will
come with instructions, go online for further support and videos.
AUTO MODE
• A period of 6 days is required after the appliance is first used for the sensor to calibrate.
During this period the appliance may be more sensitive to volatile organic compounds
(such as odours) than normal.
• During first use, whilst the sensors calibrate, the appliance can take up to 60 minutes to
show VOC and NO2 data. NO data.
2

AUTOMATIC CUT-OUT

• For your safety this appliance is fitted with automatic cut-out switches that operate if the
appliance tips over or overheats. If the switches operate, unplug the appliance and allow
it to cool. Before restarting the appliance check and clear any blockages and ensure the
appliance is on a solid level surface.
• In heating mode the appliance will automatically switch 'OFF' after 9 hours of continuous
use. To restart the machine, press the Standby ON/OFF button on either the remote
®
control or the base, or restart via the Dyson Link app.

DISPOSAL INFORMATION

• Dyson products are made from high grade recyclable materials. Recycle where possible.
• Dispose of the battery in accordance with local ordinances or regulations.
• Keep the used batteries away from children as these can still harm children if swallowed.
• Your filter units are non-washable and non-recyclable.
• Dispose of the exhausted filter units in accordance with local ordinances or regulations.
• The battery should be removed from the product before disposal.
DYSON CUSTOMER CARE
Thank you for choosing to buy a Dyson appliance
After registering your free 2 year warranty, your Dyson appliance will be covered for parts
and labour (excluding filters) for 2 years from the date of purchase, subject to the terms of the
warranty. If you have any questions about your Dyson appliance, call the Dyson Helpline with
your serial number and details of where and when you bought the appliance. Most questions
can be solved over the phone by one of our trained Dyson Helpline staff.
If your Dyson appliance needs a service, call the Dyson Helpline so we can discuss the
available options. If your Dyson appliance is under warranty, and it is a covered repair, it will
be repaired at no cost.
Your serial number can be found on your rating plate which is on the base of the appliance.