Energy Saver
( 3 )
(Hold 3 sec for Control Lock)
Touching this button turns Energy Saver
mode on and of. When you turn Energy
Saver on, the Energy Saver icon lights.
Turn Energy Saver of and the icon goes
of.
The Energy Saver function is set to "ON" in
the factory.
If condensation or water drops appear on
the doors, turn the Energy Saver mode of.
Also, touching this button for 3 seconds
turns on Control Lock which locks the
display panel and dispenser buttons so the
buttons can not be used.
Touch 3 seconds to unlock.
Fridge
( 4 )
(Hold 3 sec for Power Cool)
Touch this button to set the fridge to your
desired temperature.
You can set the temperature between 1 °C
and 7 °C.
Touch and hold this button for 3 seconds
to decrease the time needed to cool
products in the Fridge.
This can be helpful if you need to
quickly cool easily spoiled items or if the
temperature in the fridge has warmed
dramatically.
(For example, if the door was left open.)
DA68-03194L-01.indb 28
Cool Select + (Cool Select Room)
( 5 )
The CoolSelect + button lets you set the
Cool Select Room on the bottom right of
your refrigerator to one of four settings:
Freezer, Soft Freezing, Chill, or Cool.
Press the CoolSelect + button for three
seconds to activate the Cool Select Room
function, and then select one of the four
settings.
Freezer
Select Freezer to set the same temperature
as the freezer.
• Use this setting to keep frozen food.
Soft Freezing
Select Soft Freezing to set the temperature
to -5 °C.
• Use this setting to keep meat and ish
fresh longer than fridge.
Chill
Select Chill to set the temperature to -1 °C.
• Use this setting to keep deli like steak,
ish, bacon and cheese.
Cool
Select Cool to set the temperature to 2 °C.
• Use this setting to keep drink (juice,
soft drinks and beer), vegetable, fruit,
etc.
English - 28
2015. 8. 26.
9:57