Removing The Refrigerator Doors - Samsung T9000 Mode D'emploi

When moving your refrigerator
To prevent loor damage, be sure the front leveling
legs are in the up position (above the loor).
Refer to "HOW TO LEVEL THE REFRIGERATOR" in
the manual on page 23.
Flooring
For proper installation, you must place this
refrigerator on a level, hard surface that is the same
height as the rest of the loor.
This surface should be strong enough to support a
fully loaded refrigerator.
To protect the inish of the looring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working.
When moving the refrigerator, you need to pull and
push it straight forwards or back.
Do not wiggle it from side to side.
DA68-03194L-01.indb 19
REMOVING THE REFRIGERATOR
DOORS
If the refrigerator is too large to pass through your
doorway easily, you can remove the refrigerator
doors.
Tools you will need (Not provided)
Philips screwdriver
(+)
Pliers
• Disconnect power to the refrigerator
before removing the doors or drawers.
CAUTION
• Be careful not to drop, damage or
scratch the doors/drawers while
removing them.
• Use care when you remove the doors/drawers.
The doors are heavy and you could injure
yourself.
• Re-attach the doors/drawers properly to avoid:
- Moisture from air leakage.
- Uneven door alignment.
- Wasting energy due to improper door seal.
English - 19
Flat-blade Socket wrench
screwdriver (-) (10 mm)
Allen wrench Allen wrench
(4 mm) (5 mm)
2015. 8. 26. 9:57