Cleaning And Maintenance - Bimar HP125 Notice D'instructions

• Weekly programming (only activate via Smartphone): sets: the on/off periods for each
day of the week and the temperature required.
For on-off periods, select the time (hours&minutes) and confirm the function (on or off),
and then the next ones (off or on) - periods may be repeated during the week and the
temperature setting (16-40)°C.
• Anti-overturning switch: stops operation if the device is overturned.
• Safety device to stop operation if case of overheating: to return the device to operation,
remove the plug from the power socket and wait for it to cool (about 10/20 minutes),
connect the plug and switch it back on.
Use
First use: to eliminate the "new smell" operate the device for 10/15 minutes at maximum
power (Rapid): the room should be ventilated during this procedure
•
Connect the plug to the power socket: some "beeps" will be heard. The appliance will
switch to standby mode and light "H" will flash.
•
Press the "ON-OFF" button to activate the appliance and select the function required.
• To deactivate the appliance, press the "ON-OFF" button. The fan will operate for about 30
seconds (the countdown will start) to cool the appliance completely (if Eco/Rapid/Auto
mode was selected); then set the I/0 switch on 0 and remove the plug from the socket.
During long periods of inactivity, remove the plug from the electric socket.

CLEANING AND MAINTENANCE

Warning: before cleaning the appliance, remove the plug from the power socket and wait
for it to cool.
• Inspect the intake grille on the rear occasionally to ensure it is not obstructed by fluff or
threads. If the filter is dirty, release the rear grille, clean the mesh with a brush or water
(taking care not to damage it), then dry it perfectly and return it to position. Reassemble
and put the grille back in place.
• Clean the body of the device with a soft, damp cloth: do not use metal scouring pads or
abrasive products.
• If the fan heater is to be out of use for a long period of time, cover it and store it in a dry
place. It is best to return it to its original packaging to protect it from dust and damp.
• Do not immerse the appliance in water or any other liquid and do not wash it under running
water or in a dishwasher.
• If you decide not to use the appliance any more, it must be rendered unusable by cutting
off the power supply cord (first making sure that the plug has been removed from the
power socket), and any parts which are hazardous if used as children's playthings must be
rendered harmless.
Information for correct disposal of the product under the European Directive directive
2011/65/EU.
At the end of its lifetime, the product must not be disposed of with ordinary urban waste. It
can be consigned to the special waste recycling centres provided by local government, or by
the retailers who provide this service.
Proper disposal of a household appliance prevents possible detrimental effects on the
environment or health arising from its incorrect disposal and allows the recovery of its
constituent materials, generating major savings of energy and resources. The product bears
the crossed-out symbol of a wheeled rubbish bin to indicate that it must be disposed of
separately. Illegal dumping of the product by the user will be subject to prosecution under
the relevant law.