TIPTEL 410 Guide D'installation page 16

Connection of analogue telephones
Connection of the first 4 analogue telephones can be made either via the German
TAE plug (when available). The TAE connectors can be accessed after removing the
small cover embedded in the top cabinet. Telephones with international RJ-11 west-
ern plug can be connected directly to the western connectors at the bottom of the
telephone system as shown below. In case your telephones neither have TAE plugs
nor western plugs you must use adapters which are optional available.
Factory default for internal extension numbers of the first 4 analogue telephones are
50 - 53.
Note: As an alternative to the direct plug-in of telephone cables (and for fur-
ther telephones exclusively) you can connect cables inside the tele-
phone system. Please read the Installation Manual on the attached CD
on how to do this.
Connection of ISDN or system telephones
At tiptel.com 411, tiptel.com 811, tiptel comPact 42 IP 8, and tiptel comPact 82 IP 8 in
factory default settings you can additionally connect an ISDN or system telephone.
Please connect the ISDN or system telephone with the ISDN cable which cam along
with the telephone to the first S
figuration of the ISDN or system telephone you must set the telephone number
(MSN) 20.
Quick Installation Guide
connector from the right as shown above. In the con-
0
16