EnGenius FreeStyl 1 Manuel D'utilisation page 9

perform those functions during the call by pressing
key.
18. PA On/Off
a. Enable or disable the broadcast function.
b. When PA is Off, the handset can't receive broadcast from base or
other registered handsets; But it can broadcast to base or other
registered handsets.
19. Menu Display
a. To avoid mis-setup in the "Call Settings"(MENU-4), "Phone
Settings" (MENU-5) and "Base Settings" (MENU-6), these settings
can be hidden.
b. Password is required before enter Menu Display (MENU-8), the
default password is "0000".
c. When enabling the settings, these setting will not displayed any
longer, unless disabled by entering Menu Display again.
20. Group Setting
Allow handset to subscribe to one or several groups.
Re: Up to 9 groups can be subscribed.
21. Custom Name
Allow changing the "Welcome" screen to the desired wording or info,
such as the user's name.
Re: Up to 32 characters can be entered.
22. Change Pwd
Allow changing the handset password which requires to enter in Call
Barring (MENU-4-4) and Menu Display (MENU-8) .
Re:Default is "0000".
23. Change PIN
Allow changing the Base PIN which requires to enter in Base Settings
(MENU-6).
Re: Default is "0000".
24. DTMF Duration
a. From MENU-6-1 to select variable duration of DTMF tone.
b. Default is 100ms.
c. When entering the base setting, PIN is required. Default is "0000".
Re: Better to check with your phone company first before changing it.
OPTION soft
~17~
25. Programmable Flash key timing
a. From MENU-6-2 to select flash key timing
b. 9-level (100 ms - 900 ms) timing selections, default= 600 ms.
c. The default value (600 ms) works in most areas. Changing this
setting may cause Flash key to stop working. Change only when
you are certain the new value will work.
d. When entering the base setting, PIN is required. Default is "0000".
26. Assign handset ID for new handset
a. Using registered handset from MENU-6-3 to assign a handset ID to
a new handset.
b. If not assigned handset ID, the system will automatically assign a
handset ID to a new handset.
c. When entering the base setting, PIN is required. Default is "0000".
27. Clear Handset
a. Use registered handset from MENU-6-4 to remove the other
registered handset, in case the other registered handset is
defective.
b. Once the other registered handset is cleared, the user is able to
register a new handset for instead.
c. When entering the base setting, PIN is required. Default is "0000".
28. Change PIN
Allow changing the base PIN which requires entering the "Base
Settings" (MENU-6-5).
a. Use registered handset to change PIN from MENU-6-5.
b. Default PIN is "0000".
c. When entering the base setting, PIN is required. Default is "0000".
29. Auto Hang Up feature
a. Using registered handset from MENU-6-6 to turn on/off the Auto
hang up feature.
b. If turning on the feature, the handset will automatically hang up the
call when the other-end hangs up the call.
c. When entering the base setting, PIN is required. Default is "0000".
30. Set Time
The set time function allows user to set date/time to support the DTMF
caller ID (DTMF caller ID doesn't attach date/time when receiving from
PSTN, using this setting, user is able to review the date/time when the
caller ID is received).
a. Enter MENU-6 to set Base Settings.
~18~