Do Not Disturb (Silent Ring); Key Guard; Battery Recharge And Replacement - EnGenius FreeStyl 1 Manuel D'utilisation

microphone.
5. To leave the mute state, press

Do Not Disturb (Silent Ring)

1. Enter the key sequence MENU-3-1, then select "Off".
Press SELECT (Left) to confirm your choice. This will
turn off the ringer until it is turn on again from the
menu.
Re: When setting the ringer "Off", the standby screen
will show "Ringer off".
2. For temporary silencing the ringer when an incoming call arrives, press
SILENT (Left) soft key.
3. Press the
key repeatedly until the base ringer silent, this will turn off
the base ringer. When incoming call, the base will not ring.
4. Press the
key to turn on the base ringer.

Key Guard

1. To prevent accidental dialing, you can press
(Right) soft key, then press "1" to select KeyGuard
option. The handset keypad is locked. No key entry is
accepted.
2. To unlock the keypad, press UNLOCK
then, within 2 seconds, press the digit " ＊" to unlock.
3. Once returning back to idle mode for 15 seconds, the
keyguard will be automatically enabled.
4. Key Guard is in effect until unlocked.

Battery Recharge and Replacement

1. Charge the battery when one or several of the following happen:
a. Phone beeps twice every two seconds.
key.
1
Joe
033289289
SILENT
MENU
(Left) soft key,
~37~
b. Battery icon is empty.
c. Phone does not respond when a key is pressed.
d. LCD and backlighting become dim.
e. Talk range shortfall is experienced.
2. You can replace the handset battery after placing the call-in-progress on
hold.
11
3. Battery talk time and standby time vary depending on the talk/standby
pattern and the operating distance. Putting the handset back to charger
cradle as often as possible is recommended for best performance. Use
only manufacturer provided battery and charger!
~38~