EnGenius FreeStyl 1 Manuel D'utilisation page 22

3. To add a new entry:
a. Press ADD (Left) soft key.
b. Enter the name when LCD prompts "Name?" Use
DELETE (Right) soft key to delete the last digit
entered. When completed, press
key to save.
Re: Up to 16 characters can be entered as the
name.
c. You will then be prompted to enter a number for the
name just entered.
Re: Up to 26 digits can be entered as the nunber.
d. After entering the number, press the
soft key to save this entry into phonebook.
e. Enter a phonebook entry without a name, the all
records without name will be placed on top of the
phonebook list.
f. To enter the name, press the corresponding
keypad number one or more times according to the
order of the character on the key.
See table below for a list of available characters
and their orders. For example, press "2" once for
the character "A", twice for "B", etc.
Notes:
1.
When enter a phone number, the cursor automatically advances to
the next digit field. Use
cursor backward or forward to insert or delete (the digit above the
cursor, or left of the cursor if cursor is on the right of the last digit).
2.
When entering a name, the cursor automatically advances to the
next character field if you press a different key for the next character.
If you need to enter consecutive characters from the same key, you
can wait for the cursor to advance or use
to move the cursor backward or forward manually. Also use
to move the cursor to insert (to the left of the cursor) or delete
(the character above the cursor, or left of the cursor if cursor is on
the right of the last character).
3.
By default, all letters are entered in the upper case. Use the * key to
toggle between upper and lower cases.
Name?
_
SAVE (Left) soft
Caps = *
SAVE
DELETE
Number?
_
SAVE (Left)
SAVE
DELETE
or scrolling key to move the
or scrolling key
or
~43~
4.
A "Pause" entry represents a 1 second delay in dialing the following
digits, which is useful when calling a sequence of segmented
numbers (e.g., access code, credit card number, auto-attendant
entries, etc.) Pause is entered by pressing the # key twice (LCD
displays P). Entering pause twice (PP) will result in 2 seconds pause
in the dialing.
5.
Character Table:
Key
1 ' + , . * ( ) & 1
2 A B C 2
3 D E F 3
4 G H I 4
5 J K L 5
6 M N O 6
7 P Q R S 7
8 T U V 8
9 W X Y Z 9
0 0
Caps – when in character editing.
＊
＊– when in number editing.
# Space & ＃ – when in character editing
# & P (Pause) – when in number editing
4. The entries are alphabetically sorted and stored as a list in an ascending
order (A to Z) from the top of the list.
5. The first line of LCD display shows name and the 2
phone number. If the phone number is longer than 16 digits, press
OPTION (Right) soft key and select Option 3 to view the complete
number.
6. To search for a record:
a. Use scrolling key to enter the Phone Book mode.
b. Press a key that corresponds to the first character of the name you
are looking for.
c. For example, you are looking for "EnGenius", and then press the
number "3" once.
d. Use or scrolling key to locate the exact record you are
looking for.
Characters and Orders
nd
line shows the
~44~