EnGenius FreeStyl 1 Manuel D'utilisation page 29

Re: Once entering the custom name, the greeting of LCD in standby
mode will be changed as the entering.
h. Press "8" to Change Password:
Enter original password (4 digits) when enter this menu.
(1)
Enter new password then press
(2)
new password.
Press "9" to set Headset Ring: See Headset Ring operation on Page
i.
53.
7. Press "6" to set Base Settings:
When enter this menu, you must enter PIN code first (4 digits).
Re: The PIN code is for Base Settings.
a. Press "1" to set DTMF Duration.
Enter the DTMF duration (90~200ms), press
(1)
confirm the setting. Default is 100ms.
Re: Please check with your dealer before you change it. If the duration
not match with PSTN or PBX setting, it may operate faultily.
b. Press "2" select flash key timing. Default is 600ms.
Use or to scroll through option 1~9 (100~900ms).
(1)
Press SELECT (Left) soft key to confirm selection.
(2)
Re: The default value (US version: 600ms; AU version 100ms) works
in most areas. Changing this setting may cause Flash key not
working. Change only when you are certain of the new value
would work.
c. Press "3" to set Assign Next HS
Enter 2-digit handset ID followed by pressing
(1)
When register a new handset, the base will assign the specific
(2)
handset ID which assigned in advance to the new handset.
d. Press "4" to set Clear HS
Enter 2-digit handset ID followed by pressing
(1)
The base will erase the handset ID from system.
(2)
e. Press "5" to Change PIN:
Enter the new PIN followed by
(1)
Re: Default PIN is "0000".
f. Press "6" to set Auto Hang Up:
Use CHANGE (Left) soft key to select and confirm on or off. The
(1)
Default PIN is "0000".
Re: When setting "on", the FreeStyl 1 will automatically hang up if the
far end caller hung up already. However, this function depends on
if there is "Line Reversal" signal sent out by PBX or PSTN, after
the call hung up.
g. Press "7" to Set Time to support DTMF Caller ID:
SAVE (Left) soft key to confirm
OK (Left) soft key to
OK (Left) soft key.
OK (Left) soft key.
OK (Left) soft key.
~57~
Use CHANGE (Left) soft key to select and confirm on or off. The
(1)
Default PIN is "0000".
8. Press "7" to register & de-register handset: see Handset Registration
operation on Page 39.
9. Press "8" to set Menu Display:
To avoid mis-setup of Call Settings (MENU-4), Phone Settings (MENU-5)
and Base Settings (MENU-6), you can hide these menus, so that other
handset users won't have chance to mis-settup these settings.
Re: When entering the Menu Display, you have to enter password first.
a. Press "1" to set hiding/un-hiding of the Call Settings menu.
Use CHANGE (Left) soft key to select and confirm on or off.
(1)
b. Press "2" to set hiding/un-hiding of the Phone Settings menu.
Use CHANGE (Left) soft key to select and confirm on or off.
(1)
c. Press "3" to set hiding/un-hiding of the Base Settings menu.
Use CHANGE (Left) soft key to select and confirm on or off.
(1)
Re: Select "On" means the menu will be displayed on screen. Select "Off"
means the menu will be hidden.
~58~