General; Product Description; Assembly; Dimension Table - Etac Swift Mobil-2 Manuel

Etac / Swift Mobil / www.etac.com

General

Thank you for choosing an Etac product.
In order to avoid injury during handling and use, please
read through this manual first.
In the manual, the user is the person sitting in the chair.
The assistant is the person operating the chair.
Intended use:
The Swift Mobil-2 family is a range of mobile shower and
toilet chairs intended for use when carrying out hygiene
care for people with decreased mobility. The shower chair
can be used in showers, at sinks or over the toilet, as well
as for transfers to and from the hygiene room.
Contra indications: Clinical experience shows that there
are no harmful effects of using Swift Mobil-2.
Swift Mobil-2 has been tested by a testing institute and
complies with the requirements stated in EN ISO 10993-1
and SS EN 12182.

Product description

A1. Bolt, A2. Leg support, A3. Seat, A4. Arm support, A5. Back support upholstery
A6. Head support

Assembly

Dimension table

Warranty / maintenance

5-year guarantee against material and manufacturing de-
fects. For terms and conditions, see www.etac.com.
Service life 7 years. For complete information regarding the
service life of the product, see www.etac.com.
D1. Clean the product with normal non-abrasive cleaning
agents (pH value of between 5-9). Rinse and dry.
Disinfect the product with an alcohol-based disinfect-
ant, 70%.
The product is otherwise maintenance-free.

Safety

• Defective chairs must not be used.
E1. Make sure the castors are locked when users sit down
on or get up from the chair.
• An anti-tip attachment must be used if the user is an
amputee.
E2. Never stand on the foot supports as there is a risk of
tipping!

Transfers

Over a threshold:
F1. Chair only, put one foot on the wheel.
F2. With user, pull the chair backwards.
In stationary position:
F3. Always lock as many castors as possible when the chair
is to be used in a stationary position.
F4. Out-turned castors improve the chair's stability.
English
This symbol appears in the manual along with text. It
indicates instances where the safety of the user or the
assistant may be at risk.
The images which are referred to on each page are
found at the start of the manual (pages 3 to 11). See
Figures A to J for the corresponding text.
This product should be recycled as per national
regulations.
Item list: = Applies to, = Accessories
See the item list on the right which displays the information
applicable to each product.
D2. The product and its accessories can be safely cleaned
at 85°C for 3 minutes (unless otherwise stated). This
applies for reconditioning.
The product can be reconditioned. Refer to the recondition-
ing instructions at www.etac.com.
Constituent materials are resistant to common disinfectants.
Methods of surface treatment:
Lacquered surfaces = Polyester powder coating
Non-lacquered steel surfaces = Fe/Zn-Ni
E3. The sitting position has an impact on stability.
E4. Chair stability is improved if the castors point outward.
E5. See the maximum user weight for your commode chair
in the table (page 5).
E6. Risk of crushing with arm supports.
E7. Do not use defective products.
Transferring:
Assess the risks and take notes. You as a carer are respon-
sible for the safety of the user. Aids should be used if the
transfer is deemed as risky. Visit www.etac.com for manual
transfer aids.
F3-F4. It is important to ensure that the castors are locked
and pointing outward before carrying out transfers
to and from Swift Mobil-2.
F5-F7. Fold up the arm support on the transfer side of the
chair. Carry out the transfer.
18
See Figure A
See Figure B
See Figure C
See Figure D
See Figure E
See Figure F