Samsung HW-S60T Manuel De L'utilisateur page 10


Bluetooth PAIR
Switch the Soundbar to Bluetooth pairing mode.
When you press the button, the LED display changes as shown below.
• Until pairing is complete, the Multicolour LED changes as Red → Green → Blue in turn.
Red
LED
Indicator
"Ready to connect via Bluetooth."
 p (Play / Pause)
You can also play or pause music by pressing the button.
Up/Down/Left/Right

Press Up/Down/Left/Right on the button to select or set functions.

(Sound Control)
By pressing the button, you can select the desired audio mode. The desired item can be adjusted using
the Up/Down buttons. Each time the mode changes, the Multicolour LED blinks in white.
LED
Indicator
"Treble"
WOOFER (BASS) LEVEL

Push the button up or down to adjust the level of the woofer (bass) to -12 or between -6 to +6. To set the
woofer (bass) volume level to 0 (Default), press the button.
 VOLUME
Push the button up or down to adjust the volume.
LED
Indicator
→ →
Green Blue Blinks
White Blinks X1
  
"Bass" "Sync" "Side Level"
White moves to right X1
Volume Up
ENG - 10
Cyan Blinks X3
White moves to left X1
Volume Down