PURE Highway 600 Manuel D'utilisation page 24

I can't hear any sound.
Sound is distorted when
my Highway is connected
with an auxiliary cable.
When I make hands-free
calls, the other person
can't hear me.
My Highway keeps losing
digital radio signal.
22
Your Highway is not Ensure the auxiliary cable is firmly connected to your vehicle's audio system, or ensure you
connected to your vehicle. are tuned to the correct FM frequency.
Your vehicle's audio system Change the input source on your vehicle's audio system to FM radio or auxiliary input.
is not in the correct input
source.
In Bluetooth mode, your Switch on Bluetooth on your mobile device. If required, pair your Highway with your mobile
Highway is not connected to device again. Read more on page 15.
your mobile device.
The volume is too low on Turn up the volume on your vehicle and on the connected mobile device.
your vehicle or connected
mobile device.
The gain setting isn't correct. Set the gain setting to 'LOW' or change to FM transmission. Read more on page 18.
The microphone is not fully Use the instructions on page 9 to ensure the microphone is fully connected.
connected.
The microphone is too far Move the microphone as close to you as possible.
away from you.
You are travelling through Check DAB coverage in your area.
areas with weak DAB signal.
Your Highway is not installed Check the installation instructions on page 7.
correctly.
Something is causing
interference.
Switch off satellite navigation systems, dashboard cameras or other devices to see if the
l
signal improves.
Use the supplied 12V power adapter, as other adapters can cause interference.
l