Connecting The Microphone To The Antenna; Positioning The Antenna - PURE Highway 600 Manuel D'utilisation

Connecting the microphone to the antenna

Positioning the antenna

1. Insert the microphone connector into the socket at the top of the antenna, until it
clicks into place.
Note: Push the microphone cable in firmly, to ensure it's fully inserted.
2. To keep the microphone cable out of the way while you position the antenna,
temporarily clip the microphone so that it's near the driver's position. For example, clip
the microphone to the driver's sun visor.
1. Choose a position for the antenna, so that it's as high as possible on the windscreen
and at least 4cm from the side of the screen.
Make sure the antenna does not obstruct the view of the driver.
2. Gently pull down the front of the roof liner in your vehicle, until there is a small gap.
3. Push the magnetic grounding tail through the gap, with the silver-coloured magnet
facing upwards. Make sure the magnet touches your vehicle's metal bodywork.
4. Clean the chosen area of the windscreen with a cleaning cloth and wait for it to dry.
5. Unpeel the backing from the antenna and stick the antenna onto your windscreen.
9