Program Playback - OK. ORC 311-PK Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
CD/USB PLAYBACK
1.
Start or pause playback: Press
17
Stop playback: Press STOP. In stop mode, total number of tracks will appear on the display.
2.
3.
Skip to next track: Press
4.
Skip to previous track: Press
5.
During playback, press MODE/FM ST. repeatedly to switch the playback modes as follows:
Press
1x
2x
3x
4x
5x
Notes:
• This product reads CD, CD-R/-RW and MP3-CD discs. Other discs are not supported.
• When playing CD-R/RW discs the playback quality might be influenced by the quality of the burned
disc. When burning CD-R/RW disks with audio files we recommend using the slowest burning speed.

PROGRAM PLAYBACK

Notes:
• Up to 20 CD tracks or up to 99 MP3 tracks can be programmed for a playback in any desired order.
• Programmed playback can only be made from one single source - it cannot include tracks from CD
disc and USB storage at the same time.
1.
Stop playback: Press STOP.
18
Enter program settings: Press MODE/FM ST. . PROG and P01 will show on the display.
2.
3.
Select desired track: Press
Store selected track into the program memory: Press MODE/FM ST. again. P02 will now show
4.
on the display.
5.
Repeat step 3 and 4 to program additional tracks.
6.
After programming all the desired tracks, press
on the display.
7.
Stop playback: Press 1x STOP.
Cancel program playback: Press 2x STOP. PROG disappears from the display.
8.
IM_ORC311-B_170612_V03_HR.indb 21
. In pause mode, track number will flash on the display.
. Press and hold to fast forward.
. Press and hold to fast reverse.
Display
Result
Repeat one track. REP flashing in display
REP
Repeat album (only for MP3)
REP ALBUM
REP ALL
Repeat all tracks
RAND
Play a track randomly.
-
Normal playback.
or
21
.
to start program playback. PROG appears
EN
12/6/17 12:20 pm

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Orc 311-bl

Table des Matières