Power Supply; Setting The Clock - OK. ORC 311-PK Mode D'emploi

COMPONENTS
Fold out front and rear page for product illustrations.
1. Handle
2. CD compartment lid
3. Display
FUNC. button
4.
SLEEP button
5.
ALBUM button
6.
7. Speaker left
8. Playback/Pause
9. Skip to previous track
10. On/Off button
11. USB port

POWER SUPPLY

AC supply
Attention!
• Do not use this product with AC supply and battery operation simultaneously.
• Remove all of the batteries when operating this product via power supply.
• Disconnect the product before insert batteries.
Connect the power cable to the AC socket.
1
2 Connect the power plug to a suitable electrical outlet.
Note: Alternative you can use the product with batteries.
Battery operated
Attention!
• Do not use this product with AC supply and battery operation simultaneously
• Unplug the product before inserting batteries.
Remove the battery compartment cover.
3
Insert 6 batteries (type C / R14, 1.5 V
4
polarities + and –, as indicated on the batteries.
Close the battery compartment cover.
5

SETTING THE CLOCK

6
Press button to turn off the product.
Activate clock setting mode: Press and hold
7
24H starts blinking on the display.
Press or
indicator starts blinking.
1. Press
8
2. Press
Note: If the product is disconnected from power, the clock setting needs to be reset.
IM_ORC311-B_170612_V03_HR.indb 19
12. Telescopic antenna
13. AUX IN jack
14. Battery compartment
15. AC socket
16. Power cable with plug
17. TUNING knob
18. Skip to next track
19. STOP
20. Speaker right
21. Volume control VOL+/-
22. Band/Mode selector MODE/FM ST.
, not included) in the battery compartment. Match the
to choose between 12-hour/24-hour format. Press
or to set the hour. Press
or to set the minute. Press
19
for 2 seconds.
to confirm. The hour
to confirm. The minute indicator starts blinking.
to confirm. The clock is now set and displayed.
EN
12/6/17 12:20 pm