Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Under advance settings menu, press ' < ' or ' > ' button to select 'Scan setting', and then press 'Select/Menu'
button to confirm.
Press ' < ' or ' > ' button to select 'All stations' (default) or ‚Strong stations only', and then press 'Select/Menu'
button to confirm setting.
16.2.2 Audio setting
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor quality audio.
The audio quality can be improved using mono.
Under advance settings menu, press ' < ' or ' > ' button to select 'Audio setting', and then press 'Select/Menu'
button to confirm.
Press ' < ' or ' > ' button to select 'Stereo allowed'(default) or 'Forced mono', and then press 'Select/Menu'
button to confirm setting.
16.2.3 System
Please refer to 16.1.5.
17 Troubleshooting
Problem:
No Power.
Solution:
Ensure the power adapter is properly connected.
Make sure that the radio is turned on.
Problem:
The unit does not respond when pressing any buttons.
Solution:
The unit may become unresponsive during use. Switch the unit off and then on again to reset it.
Problem:
Poor radio reception.
20
Publicité
Chapitres
Table des Matières
Dépannage
