Basic Operation; Switching Between Standby, Dab And Fm Mode; Dab Radio Mode; Fm Radio Mode - TechniSat DIGITRADIO 51 Mode D'emploi

3 Manual tune stations by pressing ' < ' or ' > ' button to find desired station.
Note: In FM mode you can also tune the station manually by pressing ' < ' or ' > ' button to adjust the FM
frequencies with 0.05MHz up or down respectively.
4 Your radio will automatically tune.
5 Adjust volume using '- Volume +' buttons, press 'Volume –' to decrease volume and press 'Volume +' to
increase volume.
Note: During the scanning, the sound will muted automatically.

6 Basic operation

6.1 Switching between Standby, DAB and FM mode

Connect the power adapter to DC IN socket of the radio, it will then turn on.
Press 'DAB/FM' button to switch between DAB and FM mode.
Press ' ' button to switch radio go to standby mode.

6.2 DAB radio mode

DAB mode receives DAB digital radio and displays information about the station and program/track as
broadcast.

6.3 FM radio mode

FM mode receives analogue radio from the FM wave band and displays RDS (Radio Data System) information
about the station and show (where broadcast). While FM is playing, the LCD displays its frequency or, if RDS
information is available, station name and any further 'RADIO TEXT' information. If no information is available,
just the frequency and a 'NO RADIO TEXT' message are shown.
10