Manual Tune - TechniSat DIGITRADIO 51 Mode D'emploi

16.1.1 Full scan
Under the advance settings menu, press ' < ' or ' > ' button to select 'Full scan', and then press 'Select/Menu'
button to confirm.
Full scan starts automatically. Once a scan is complete, the radio returns to playing the previously selected
station or first station on the list.
Note: If no radio station found, it shows 'NO DAB STATION'. For a better reception, adjust the antenna or do the
full scan again in another location.

16.1.2 Manual tune

As well as the normal method of scanning, you can also manually tune to a particular channel/frequency. This
can be useful for adjusting your antenna to achieve the best possible reception and scanning a particular
channel to update the stations list.
Under advance settings menu, press ' < ' or ' > ' button to select 'Manual tune', and then press 'Select/Menu'
button to confirm.
Press ' < ' or ' > ' button to select particular channel/frequency and then press 'Select/Menu' button to confirm.
Note: The display shows a live indication of the received signal strength on the selected frequency.
Adjustments to your antenna will affect the received signal strength displayed. The new stations will be
added to station list automatically.
To play the found station, first press and hold 'Select/Menu' button to exit manual tune
16.1.3 DRC
If you are listening to music with high dynamic range in a noisy environment (for example classical music while
cooking), you may wish to compress the audio dynamic range. This makes quiet sounds louder and loud sounds
quieter.
Under advance settings menu, press ' < ' or ' > ' button to select 'DRC', and then press 'Select/Menu' button to
confirm.
Press ' < ' or ' > ' button to select 'DRC off'(default), 'DRC high' or ‚DRC low', and then press 'Select/Menu'
button to confirm setting.
16