Connections - Telefunken H28V2 Mode D'emploi

Getting Started

Connections

Connector Type
Scart
Connection
(back)
VGA
Connection
(back)
SIDE AV
PC/YPbPr
Audio
Connection
(side)
HDMI
Connection
(back)
Coaxial Out
Connection
(back)
Coaxial Out
Side AV
SIDE AV
(Audio/Video)
Connection
(side)
HEADPHONE
Headphone
Connection
(side)
YPbPr Video
YPBPR
Connection
(side)
USB
Connection
(side)
CI
Connection
(side)
Cables
Side Audio/Video
Connection Cable PC Audio Cable
(Supplied) (Not supplied)
AV Connection Cable
(supplied)
YPbPr Connection Cable
(not supplied)
English - 27 -
Device
NOTE: When connecting
a device via the YPbPr or
S i d e AV i n p u t , y o u m u s t
u s e c o n n e c t i o n c a b l e s t o
enable connection. See the
illustrations on the left side. | To
enable PC audio, you will need
to use SIDE AV CONNECTION
cable's WHITE & RED inputs. | If
an external device is connected
via the SCART socket, the TV
will automatically switch to AV
mode.| When receiving DTV
channels (Mpeg4 H.264) or
while in Media Browser mode,
output will not be available via
the scart socket. | When using
the wall mounting kit (optional),
we recommend that you plug all
your cables into the back of the
TV before mounting on the wall.
| Insert or remove the CI module
only when the TV is SWITCHED
OFF. You should refer to the
module instruction manual for
details of the settings. | Each
USB input of your TV supports
devices up to 500mA. Connecting
devices that have current value
above 500mA may damage your
TV.
If you want to connect a
device to the TV, make
sure that both the TV and
the device are turned off before
making any connection. After the
connection is done, you can turn
on the units and use them.