Connections - Telefunken D55U600M4CWI Mode D'emploi

Connections

Connector Type
VGA
Connection
(back)
PC/YPbPr
AUDIO IN
Audio
Connection
(back)
HDMI
Connection
(side&back)
SPDIF
SPDIF
(Optical Out)
Connection
(back)
Back AV
BACK AV
(Audio/Video)
Connection
(back)
HEADPHONE
Headphone
Connection
(side)
YPBPR YPbPr Video
Connection
(back)
USB
Connection
(side)
CI
Connection
(side)
LAN
Ethernet
Connection
(bottom)
If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making
any connection. After the connection is done, you can turn on the units and use them.
Cables
YPbPr/PC Audio Cable
Audio Video Cable
PC to YPbPr Connection Cable
LAN / Ethernet Cable
English - 41 -
You can use YPbPr to VGA cable
Device
to enable YPbPr signal via VGA
input. | You cannot use VGA
and YPbPr at the same time. |
To enable PC/YPbPr audio, you
will need to use the back audio
inputs with a YPbPr/PC audio
cable for audio connection. |
When using the wall mounting
kit (available from third party
in the market, if not supplied),
we recommend that you plug all
your cables into the back of the
TV before mounting on the wall.
| Insert or remove the CI module
only when the TV is SWITCHED
OFF. You should refer to the
module instruction manual for
details of the settings. | The/Each
USB input of your TV supports
devices up to 500mA. Connecting
devices that have current value
above 500mA may damage your
TV. | By connecting an HDMI cable
to your TV, you have to use only a
shielded (high grade) HDMI cable
to guarantee a sufficient immunity
against parasitic frequency
radiation. And make sure to use a
High-Speed HDMI cable that can
transmit high definition signals,
such as 4K contents, for trouble-
free transmission.