8.2. Trimming hedges/bushes
ATTENTION!
Possible appliance damage.
Do not use the shrub/hedge trimmer blade to cut
dead branches or other hard objects. The cutting
blade could be damaged.
The shrub/hedge trimmer blade is not suitable for
cutting grass or weeds. Grass and weeds can jam the
cutting tool.
Do not cut any branches thicker than about 10 mm.
Hold the appliance properly with one hand on the handle, switch it on as
described above and move the cutting tool in front of your body when working.
When trimming a shrub/hedge, work from the top to the bottom.
8.2.1. Recommended cutting times
− Cut deciduous hedges in June and October.
− Cut evergreen hedges in April and August.
− Cut conifers and other fast-growing shrubs approximately every six weeks
from May.
9. Storing the appliance
Switch off the appliance and secure it by removing the safety key.
Clean the appliance and lubricate the cutting tool. Reattach the blade cover to
avoid injury.
Always store the appliance secured against switching on and out of the reach of
children or other unauthorised parties in a dry, clean and frost-free location.
DE
FR
NL
EN
95 of 104