Disposal And Recycling - Pattfield Ergo Tools PE-KW 300 Traduction De La Notice Originale

8.1 Cleaning the paddle wheel
If a lot of deposits collect in the housing, the bottom part of the equip-
ment must be dismantled as follows:
1. Disconnect the intake cage from the housing.
2. Clean the paddle wheel with clear water.
Important! Do not put down or rest the equipment on the paddle
wheel!
3. Assemble in reverse order.
8.2 Maintenance
There are no parts inside the equipment which require additional
maintenance.
8.3 Ordering replacement parts:
Please quote the following data when ordering replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
Current prices and information are available on request at your Horn-
bach store.

9. Disposal and recycling

The equipment is supplied in packaging to prevent it from being da-
maged in transit. The raw materials in this packaging can be reused
or recycled. The equipment and its accessories are made of various
types of material, such as metal and plastic. Never place defective
equipment in your household refuse. The equipment should be taken
to a suitable collection center for proper disposal. If you do not know
the whereabouts of such a collection point, you should ask in your
local council offi ces.
Anl_PE_KW_300_SPK7.indb 143 Anl_PE_KW_300_SPK7.indb 143
- 143 -
GB
08.10.15 14:19 08.10.15 14:19