Technical Data; Before Starting The Equipment - Pattfield Ergo Tools PE-KW 300 Traduction De La Notice Originale

4. Technical data

Mains connection ......................................................... 230 V ~ 50 Hz
Power rating ............................................................................. 300 W
Max. pumping rate .................................................................7000 l/h
Max. delivery head ........................................................................6 m
Max. submersion depth .................................................................5 m
Max. water temperature ............................................................. 35°C
Hose connection ......................................approx. 47.8 mm (G 1½ ) IG
Max. size of foreign bodies: .................................................... Ø 5 mm
Switching point height: ON ...................................max. approx. 62 cm
Switching point height: OFF ....................................min. approx. 5 cm
Protection type. ........................................................................... IPX8

5. Before starting the equipment

Before you connect the equipment to the mains supply make sure
that the data on the rating plate are identical to the mains data.
5.1 Installation
The equipment can be installed either:
•
Stationary with a rigid pipe line
or
•
Stationary with a flexible hose line
Notice!
Before you use the pump, clarify any possible special conditions
which need to be fulfi lled for the installation!
For example, additional safety measures may be needed if damage
to property could result from a power failure, soiling or a defective
gasket.
Anl_PE_KW_300_SPK7.indb 139 Anl_PE_KW_300_SPK7.indb 139
- 139 -
GB
08.10.15 14:19 08.10.15 14:19