Olympus CAMEDIA D-540ZOOM Manuel De Base page 15

6
Press
Y-M-D (Year/Month/Day), M-D-Y (Month/Day/Year), D-M-Y
(Day/Month/Year). Then press
• Move to the year setting.
• The following steps show the procedure used when the date and time
settings are set to Y-M-D.
7
Press
month setting.
• To move back to the previous setting, press
• The first two digits of the year are fixed.
8
Repeat this procedure until the date and time are
completely set.
• The camera only displays the time in 24-hour time system (
would be 14:00
"
9
Press .
• For a more accurate setting, press
seconds. The clock starts when you press the button.
10
Slide the power switch to OFF.
• The date and time settings will be returned to the factory default
settings if the camera is left without the battery for approximately 3
Note
days.
to select one of the following date formats:
to set the year, and press
).
"
.
to move to the
.
when the time signal hits 00
2 p.m.
" "
En
En 15