Publicité
Les langues disponibles
Les langues disponibles
User Manual
English
Installation*
DO NOT connect the Ethernet Adapter to the computer before completing the driver installation.
Insert the Driver CD into your disk drive. Locate and double click <Setup.exe> to launch the setup
procedure. Complete the installation process as guided.
Alternatively, you can download the driver from www.lindy.com.
Verifying the driver
Windows:
Connect the USB to Ethernet adapter to the Machine.
Open the Device Manager in the Windows Control Panel.
In the Network adapters group, an item named "ASIX....Ethernet Adapter" should be listed.
Mac OS X:
Connect the USB to Ethernet adapter to the Mac.
Click the System Preferences -> Network -> USB Gigabit Ethernet device, which should be active and
on line.
Note: If a question or exclamation mark appears, then driver is not properly installed. Please delete the
item then, unplug the adapter and repeat the installation.
Connection
Connect the adapter to an available network when the installation procedure is completed. To do this,
connect an Ethernet cable to the Ethernet port of the adapter and then connect the other end of the
Ethernet cable to an available network hub, switch or router.
* The description of the driver installation shown here is an example. The actual strings and screen shots
.
may vary slightly on each operating system
Publicité
