Publicité
Les langues disponibles
Les langues disponibles
Sib XL-T
U s e r m a n u a l
Sib XL-T is provided with a wall binding kit which allows both
vertical and horizontal positioning. The Polyfix plate allows as
well Sib XL-T to be fixed upon optional Hop long stands and
Bop short stands. Check with your dealer for more details.
Horizontal installation Sib XL-T
• Locate and mark Sib XL-T wall position making sure that the
tweeter be leveled with the ear of a normally seated listener.
• Place the wall rest on to the wall and drill. Use only plugs
fitting your wall material.
• If the loudspeaker cable is embedded in the wall, guide it
through the wall mounted bracket's opening as indicated.
• If the loudspeaker cable is fixed to the wall slide it under the
wall mounted bracket as indicated.
• Guide the loudspeaker cable through the Polyfix plate as
indicated.
• Connect the loudspeakers cables to the rapid push-button
binding posts (pure copper wire at least 1.5mm in diameter).
• Attach the Polyfix plate to the loudspeaker with 4 screws as
indicated. The hollow side of the plate must be directed to the
loudspeaker's inside.
• Clip the plate on the loudspeaker to the wall mounted bracket
as indicated.
Vertical installation Sib XL-T
• Rotate the Polyfix plate to the right angle for proper vertical
positioning.
• Follow general mounting procedures as stated above.
5
Publicité
