Congratulations,
You have just acquired a Classic emergency power supply by SLAT, and we thank you for your choice.
This manual includes instructions for the installation, commissioning and maintenance of this equipment.
In order for the equipment to work properly, we recommend that these instructions be followed very carefully.
This equipment is designed to be connected to the 230 V public distribution network.
To avoid any risk of electric shock, all INTERVENTIONS must be carried out with the equipment SWITCHED
OFF (upstream two-pole circuit-breaker open).
Interventions with the equipment switched on are authorized only when it is impossible to switch the
equipment off. The operation must only be performed by qualified personnel.
Standards, directives and protection of the environment and public health
All products of the Classic range are compliant with LV and EMC directives (immunity and emission). They are
compliant with standards:
•
EN 60950-1 (2006) + A11 (2009) + A1 (2010) + A12 (2011) + A2 (2013) (TBTS class)
•
EN 61000-6-1(2007), EN 61000-6-2 (2005), EN 61000-6-3 (2007), EN 61000-6-4 (2007) + A1 (2011)
•
EN 55022 (2006) + A1 (2007) class B
•
UL1950 for components.
is ISO 14001 certified since 2008.
SLAT
manufactures all its products in accordance with RoHS and WEEE environmental directives.
SLAT
recycles its products at the end of their service life through its recycling programme.
SLAT
Our warranty is three years from the date of delivery (ex-works). It is strictly limited to reimbursement or
replacement (at our discretion and without compensation of any sort) of parts recognised as faulty by our
services, following return of the product to our premises at the buyer's expense. The replacement or repair of
equipment is possible only on our premises. In order to allow our customers to benefit from the latest technical
improvements, SLAT reserves the right to make all necessary modifications to its products. The battery is not
included in the warranty.
...
Safety precautions
Warranty
23