Technical Specifications
Materials In Contact With
Performance Data
Maximum Head
Maximum Lift
(self-priming)
Maximum Combined
Head and Lift
Product Code
Port Size
Lift
0 m (0 ft)
0 m (0 ft)
Performance data is based on factory test at specified lift and head and is typical of what may reasonably be achieved.
Actual performance may vary depending on installation and operating conditions.
Standards Applied: ISO15083
Operation
1.
To operate the pump, open the cover by gripping the handle.
2.
The pump is then ready for instant operation.
3.
After use, push firmly to lock the handle in the closed position.
Maintenance
Regular inspection of the pump is recommended. Rubber components should be replaced if
worn or every three years.
Service kit number - AK5010.
Replacing the Diaphragm:
1.
Press out hinge pin in illustrated direction using appropriate force (then slide off handle).
Care should be taken to keep the retaining washer in a safe place (see fig. 9).
2.
Remove pump from bulkhead by removing mounting screws and disconnecting
mounting wedge (see fig 5).
Product Code
Weight
Hose Connections
Materials
Fluid
Service Kit
Flow Rate at
Head
45 Strokes/min
38.5 ltrs/min
0 m (0 ft)
10.2 US gals/min
32.75 ltrs/min
1 m (3 ft)
8.7 US gals/min
Whale Smartbail
BP5010B, BP5021B
BP5010B - 25 mm ports (1")
BP5021B - 38 mm ports (1
Glass-filled Polypropylene, Stainless Steel,
Nitrile, Santoprene
Pump body: Glass-filled Polypropylene
Inlet and outlet valves: Nitrile
Diaphragm: Santoprene
AK5010 - Diaphragm, valves and seals
3m (9.8ft)
3m (9.8ft)
3m (9.8ft)
BP5010B
25 mm (1")
Flow Rate at
60 Strokes/min
51.3 ltrs/min
13.6 US gals/min
43.6 ltrs/min
11.5 US gals/min
0.6 kg
/
")
1
2
®
®
BP5021B
38 mm (1
Flow Rate at
Flow Rate at
45 Strokes/min
60 Strokes/min
43.5 ltrs/min
11.5 US gals/min
15.3 US gals/min
43.5 ltrs/min
11.5 US gals/min
15.3 US gals/min
/
")
1
2
58 ltrs/min
58 ltrs/min