Ecreso FM 750W Guide De Mise En Route page 8

English version
9. MPX configuration
-> S T
1 S T
-> M O / S T : S T E R E O
1
M A I N
-> S T
-> M O D U L A T I O N >
1 M O D U L A T I O N
-> D E V
1 M O D U L A T I O N
-> D E V
1
M A I N -> M O D U L A T I O N
8
G O T O
E N C O D E R >
E N C O D E R
G O T O
-> C O D E R
G O T O
E N C O D E R >
G O T O
M P X : 1 2 7 . 2
P I L O T : 1 8 . 4
G O T O
Press the "+" key until you see the ST Encoder
menu. Then press the "Enter" key.
Press once again the "Enter" key to set the audio
type. Select what you need using "+" and "–" keys:
• STEREO
• MONO
Confirm with the "Enter" key and press "+" until you
see this screen. When the CODER menu is selected,
press "Enter" to return to the list of menus.
Press the "+" key until you see the Modulation
menu.
Then press the "Enter" key.
Browse through the Modulation menu using the "+"
and "–" keys to set the total deviation between 0
and 150 kHz,
set the pilot deviation between 0 and 25.5 kHz.
For each of these values, use the "Enter" key to
switch to edit mode, the "+" and "–" keys to adjust
values and the "Enter" key to confirm.
Press the "+" key until you see this screen. When
the Modulation menu is selected, press "Enter" to
return to the list of menus.