Ecreso FM 750W Guide De Mise En Route page 6

English version
6. Setting the transmitter
Set the power (in W), the frequency (in MHz) and enable the RF:
9 8 . 0 0 M H z
9 8 . 0 0 M H z
-> T X
1 F R E Q
-> 9 8 . 0 0
1 F R E Q
-> 9 8 . 0 0
1 P W R
-> 1 0 0
1
M A I N
6
P A R A M E T E R S >
P F W D
P F W D
P F W D P R E F
1 0 0
G O T O
-> R F
From the main screen, press the "Enter" key
0 W
to display menus then the "+" key until you
see the TX Parameters menu.
Once you see this screen, press "Enter"
0 W
You may now set the frequency and the
power. The arrow preceding the frequency
0
indicates that this parameter is selected:
press "Enter" to switch to edit mode.
Using the "+" and "–" keys, adjust the
0
frequency starting with the last digit. Once
you've reached the desired value, press
"Enter" to go to the next digit. Follow the
same procedure for all digits and confirm
with the "Enter" key. Use the "+" to go the
next screen.
The arrow now appears before the power: set
5 2
the power in the same way you set the
frequency.
After confirming the power value with the
"Enter" key, enable the RF using the front
panel button.
Press the "+" key until you see this screen.
When the RF menu is selected, press "Enter"
to return to the list of menus.