Settings; Cleaning And Maintenance; Safety Information - Caso Germany 11660 Manuel D'opération

Cold milk froth
1. Please put the whisk for frothing into the lid holder.
2. Switch on the appliance. Press the power button for approximately 2 seconds.
3. The power button lights blue.
4. The appliance starts to make cold milk foam and stops automatically as soon as the
foam is finished.
Heating milk
1. Please put the whisk for frothing into the whisk holder.
2. Press the power button twice.
3. The power butoon blinks red. This is the setting to heat up milk.
4. The whisk rotates with reduced speed in order to ensure even heat distribution and to
prevent the milk from burning.
► Please touch the power button with your finger in such a manner that you can still see
the different settings.
5.1.1

Settings

Setting power button: Milk:
Lights red
Blinks red
Lights blue
► Please pour out the milk and the milk froth. By using a metal spoon or another object
with sharp edges you risk damaging the coating of the jug.
► Only fill milk into the appliance.

6 Cleaning and maintenance

This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.

6.1 Safety information

Please observe the following safety notices, before you commence with cleaning the
device:
► Before cleaning, switch off the unit and take the power plug out of the outlet.
► Clean the appliances with a soft cloth.
► Don't clean the appliances with inflammable detergents.
caso Milk Frother
Please note
Making warm milk froth
Heating up milk
Making cold milk froth
Please note
Attention
11