GVB MultiCap-Flat Notice D'utilisation page 17

MultiCap user manual
Electrodes and impedances
1. In order to minimize the impedance, the
electrode position on the scalp should be
prepared. We recommend the abrasive gel
"EVERY" or "NUPREP" which both have very
good qualities
user-friendly basecut of the MultiCap, all
electrode positions can be reached quite simply.
2. This type of cap can be used without the need
for additional electrode holders. Thanks to
innovative technology,
attached directly to the cap. Simple fitting makes
it possible to adapt the cap quickly and
individually to your needs.
3. Make sure, that the cables of the electrodes are
not tangled or
velcro-strap to focus the cables (see photo).
4. In order to raise the contact-surface, use a
conductive gel like "NEURGEL", or for long time
recordings the "SYNAPSE" gel that you can fill
with the provided blunt needle kit into the
intended gap of the electrode.
(MultiCap-Flat and MultiCap Doc)
for preparation.
the electrodes
folded. Use the
By the
are
provided
CAP CAP
17