Accu-Chek Ultraflex Mode D'emploi page 13

connector (H) from the cannula housing (G).
Put the disconnect cover (L) on the cannula
housing.
Reconnect Accu-Chek Ultraflex
WARNING
Before reconnecting, ensure that a drop of
medication appears at the tip of the connector
needle.
Fill the Accu-Chek Ultraflex until medication
comes out of the connector needle.
Hold the self-adhesive (F) in place and remove
the disconnect cover (L) from the cannula
housing (G). Reattach the connector (H) to the
cannula housing. An audible «click» ensures the
connector is locked.
WARNING
It is not necessary to give an additional bolus.
Distributed by:
Disetronic Medical Systems Inc.
11800 Exit 5 Parkway, Suite 120
Fishers, IN 46037, USA
Toll Free 1-800-280-7801
info @ disetronic-usa.com
www.disetronic-usa.com
en