Getting Started; Assembling The Handle - Yardworks 060-0583-8 Manuel De L'opérateur

model no. 060-0583-8 | contact us: 1.866.523.5218
WARNING: Keep the extension cord clear
of the working area. Position the cord so
that it will not get caught on obstacles
while you are operating the snowblower.
Failure to do so can result in serious
personal injury.
SAVE THESE INSTRUCTIONS!

GETTING STARTED

1. Remove the snowblower and all other items from
the box.
2. Determine the left and right hand side of the
snowblower by standing in the normal operating
position.
3. Check all items for shipping damage. If damage
is found or suspected or if any of the parts are
missing, do not assemble. Instead, promptly inform
the dealer where you bought the snowblower or
contact at 1-866-523-5218 for assistance.
4. Check to make sure the upper chute crank is
included.

ASSEMBLING THE HANDLE

1. For easy assembly,
the unit comes
complete with
most parts already
connected. To
complete the handle
assembly, simply pull
the middle frame back
and pull the upper
frame up.
2. Secure the connection
of the lower frame to
the middle frame by
fastening the first set
of joint fixing T-bolts
and knobs on each
side.
3. Before securing the
upper frame, slide
the extension cord
restraint hook up the
upper frame (Fig. 3).
4. Secure the connection
of the upper frame to
the middle frame by
fastening the second
set knobs and bolts
on each side (Fig. 4).
Fig. 1
Fig. 2
Middle
Middle
frame
frame
Knob +
bolt Knob + bolt
Lower
Lower frame
frame
Fig. 3
Extension
Extension
cord restraint
cord restraint
hook
Upper
hook
Upper frame
frame
Fig. 4
Fig. 4
Upper Upper
frame
frame
Knob +
Knob +
T-bolt
T-bolt
Middle frame
Middle frame
9
®
/MD