Scope Of Use - Rothenberger Industrial 030955E Mode D'emploi

030955E_Anleitung
WHAT TO DO WHEN LEAKS ARE DISCOVERED:
If you smell gas or suspect a gas leak, shut down the gas tool and equipment immediately
and take the tool outside to a place with good air circulation. There you can check the tool
for leaks. Never try to find a leak with an open flame, always use soap sud.
OPERATING INSTRUCTIONS

SCOPE OF USE

Your propane roofing torch is suited for a variety of applications: preheating, scarfing, foil
bonding, tarring, roof insulation, drying concrete as well as ecologically removing weeds and
moss.
This roofing torch operates with LPG. When equipped with a respective propane regulator
it can be used with 5 kg, 11 kg and 33 kg propane bottles.
It can be dangerous to connect other than the above recommended gas bottles.
TECHNICAL DATA:
Flame temperature:
Gas type:
Gas pressure:
This gas tool must be operated together with a suitable propane regulator.
Warning:
Professional craftsmen (roofers, gardeners, builders) must use this roofing torch together
with a safety valve. We recommend that the average consumer also use such a safety device.
In the event that the 5 m hose ruptures, bursts or is punctured (e. g. on sharp edges) the
safety valve immediately interrupts the flow of gas at the pressure regulator. This stops the
flow of gas and protects the roofing torch user against hazardous situations.
BEFORE USING THE TOOL
Ensure that all valves and stop-cocks are closed before you start. The threads on the hose
and hose connection to the blowpipe are left-handed. Always check for leaks before use.
Never try to find a leak with an open flame, always use soap sud.
06.10.2009 14:32 Uhr
up to 1060°C (1940°F)
propane, propane/butane, butane
max. 4.0 bar
7
Seite 7