Cleaning, Maintenance And Storage; Travelling With The Device - Braun Silk-expert Pro 3 6032 Mode D'emploi

Step 4: Your Treatment Schedule
For optimal results, Silk·expert should be used once a week for 12 weeks to ensure all hair follicles are
treated. After the initial treatment phase (12 treatments), we recommend the device is used once a month,
or as required, to maintain results.
Step 5: Switching Off the Device
When the treatment is finished, unplug the device. Refer to section 9 for details of how best to look after
your device.

9 Cleaning, Maintenance and Storage

After treatment, always unplug the device.
After use, the handset, the skin tone sensors (2) and the treatment window (1) should be inspected for
damage and wiped down with a dry, lint free cloth. If any marks or black spots are seen, then it is best to
clean them off straight away after treatment.
NEVER use water or other cleaning fluids, as these can damage the device leading to a potential safety hazard.
WARNING: The glass filter (9) can get hot during use. DO NOT touch or clean the filter for at least 5 minutes
after use to allow it to cool down.
To ensure maximum performance, keep the heads (10, 11) with their built-in reflectors free from dirt, hair
or other debris. Do not clean them in water, but use a dry cloth for cleaning them carefully.
Store the device in a cool, dry place. Make sure that the treatment window and skin tone sensors are
protected from damage.
Regularly check the device (including cords) for visible signs of damage. In case of damage or cracks,
stop using the device.
  Travelling with the Device
The device will work with all commonly encountered mains supplies. Providing you have a suitable adaptor
for the mains power cable plug, the device will operate as normal.
12