Safety Information - Weinmann WM 15806 Notice De Montage

These fitting instructions describe how to fit the following brackets to a rail
(Ø 19 mm - 40 mm):
• Wall bracket BASE-STATION 1 NG (WM 9640/9645)
• Holding plate for wall brackets (e.g. for Medumat Transport
charger or Accuvac) WM 15845
Read the instructions for use for the brackets in question. They form part of
these fitting instructions.

Safety information

Warning!
• Use only rails designed for a weight of at least 7 kg, otherwise
the holding plate may fall off, injuring people and damaging
the device.
• The bracket with rail bracket may only be attached to round
rails (Ø 19 mm - 40 mm). Any other kind of attachment, to
standard hospital rails, for example, is not permitted.
• The bracket and rail bracket may only be used on wards. They
may not be used in emergency vehicles.
• Suspending third-party products or other makes of adapter is
not permitted.
Note:
• The fitter is responsible for the fitting of the bracket.
6