Weinmann WM 15806 Notice De Montage page 8

Fitting the bracket to the rail
Removing the bracket
8
1. Suspend the bracket from the rail using
the rail bracket (1).
1
Warning!
Risk of injury if bracket is loose!
An inadequately secured bracket may
fall off and injure people.
– Ensure that the bracket can no longer
be moved on the rail.
– Use only rails with diameters between
19 mm and 40 mm.
2. Tighten up the locking screw (2) of the
rail bracket until the bracket can no
longer be moved.
2
1. Hold the bracket steady with one hand.
2. Slowly undo the locking screw (2) of the
rail bracket.
3. Remove the bracket.
2