Monacor International img Stage Line FM-102DAB Mode D'emploi page 9

* Instead of the button ENTER, the rotary knob TUNE –
ENTER /AUTOSCAN can be briefly pressed. (How-
ever, this is not possible when the button ENTER must
be pressed for 2 seconds to store a station.)
Button
on the remote control
on the unit
To switch between:
 
MODE — FM reception (
— DAB+ reception (
To scan all stations and store them automatically in a list:
Keep the button / knob pressed for 2 seconds until
 
AUTO SCAN
on the display.
All stations are stored when the display indicates the first station from the list.

TUNE To call up a station from the list:
Turn the knob TUNE and press the button ENTER* or
 
DOWN UP press the button DOWN or UP (repeatedly) and press the button ENTER*.
To assign a station number (1 – 20) to the station set:
1. Press the button PRESET.

PRESET
2. Use the button DOWN or UP to select the station number desired.
3. Keep the button ENTER pressed for 2 seconds
until PRESET
To scan all stations and store them automatically in a list:
Keep the button / knob pressed for 2 seconds until
 
AUTO SCAN
on the display.
All stations are stored when the display indicates the first station from the list.
To call up a station from the list:
1. Press the button FM LIST:
 
FM LIST
2. Turn the knob TUNE or press the button DOWN or UP to select the station.
3. Press the button ENTER* to call up the station.
To start the station scan:
Keep the button pressed until the figures start to appear on the frequency
 
indication.
DOWN UP
Fine tuning by 0.05 MHz increments:
Briefly press the button (repeatedly).

TUNE To set stations manually: Turn the knob.
To assign a station number (1 – 20) to the station set:
1. Press the button PRESET.

PRESET
2. Use the button DOWN or UP to select the station number desired.
3. Keep the button ENTER pressed for 2 seconds
PRESET
until
No. Buttons
4 4
 
1 ... 10, SHIFT 10 10
18 SHIFT, 8
20 SHIFT, 10
Turn the knob TUNE.

TUNE For DAB+: Select a station from the list and call it up with the button ENTER*.
For FM: Manually tune the receiving range by 0.05 MHz increments.
To call up the previous / next station:
1. Press the button PRESET.

PRESET
2. Press the button DOWN or UP (repeatedly). A station number where
no station is stored will be indicated by
3. Press the button ENTER*.
  To mute and unmute the sound.
MUTE
To view additional information for
DAB+ RDS (radio data system for FM,


 

INFO





To switch off the tuner automatically:
1. Press the button SLEEP so that
2. Use the button DOWN or UP or the knob TUNE to set the time in minutes
that is to elapse until the tuner is switched off.
3. Press the button ENTER*.
4. To show / hide the remaining time to elapse, use the button SLEEP. When the
 
SLEEP
remaining time is shown on the display, the function can be switched off
again (
5. When the time set has elapsed, the tuner will switch off automatically. How-
ever, any button can be pressed to briefly switch on the display illumination
and to read the time and the date.
6. To activate the function again, press the button SLEEP.
The switch-off time can also be set via the menu.
Function
FM appears on the upper right of the display)
FM disappears)
Storing DAB+ stations
... saved appears on the display.
Storing FM stations
FM Station List
saved
... appears on the display.
Calling up saved stations
Preset
Additional functions
None
available)

Information on title / programme . . . . . . . [

Genre . . . . . . . . . . . . . . . . . . . . . . . . . . . [
– Name of the broadcasting station . . . . . [

Time / date . . . . . . . . . . . . . . . . . . . . . . . [
– Channel and frequency . . . . . . . . . . . . . [
– Data rate, mono / stereo . . . . . . . . . . . . . [

Signal strength . . . . . . . . . . . . . . . . . . . . [ ƈƈƈƈƈƈƈ
– Error rate . . . . . . . . . . . . . . . . . . . . . . . . [
Sleep off
Sleep off ).
Scanning appears
Scanning appears
appears on the display.
empty
. . .
appears when no information is
ABBA - Mama Mia ]
Pop Music ]
BBC digital ]
15:29 16-06-2015 ]
5C 178.352MHZ
]
72kbps Stereo
]
]
Signal error 2 ]
appears on the display.
GB
9