Publicité
Les langues disponibles
Les langues disponibles
Trouble Shooting
malfunction
Drill unit has to
much play
(vibration)
According to our general terms of delivery for business dealings, suppliers have
to provide to companies a warranty period of 12 months for redhibitory defects
(to be documented by invoice or delivery note).
Damages due to natural wear, overstressing or improper handling are excluded
from this warranty.
Damages due to material defects or production faults shall be eliminated free of
charge by either repair or replacement.
Complaints will be accepted only if the tool is returned in non-dismantled
condition to the manufacturer or an authorized Eibenstock service centre.
Declaration of Conformity
It is necessary that the machine (f. e. ETN 2001 P) used in this drill rig comply
with the requirements which are described in the specifications of the drill rig (f.
e. drilling diameter, fixture of the motor).
We declare that this unit has been designed in compliance with 2006/42/EC.
This unit must not be put into service until it was established that the Power
Tool to be connected to this unit is in compliance with 2006/42/EC (identified by
the CE-marking on the Power Tool).
Vakuum Technik GmbH Eibenstock
Lothar Lässig
08.05.2014
possible cause
stand has been loose
guidance has to much play
thrust piece worn
Warranty
repair
adjust the wing nut
adjust guidance (see above)
replace the thrust piece
18
Publicité
