Publicité
Les langues disponibles
Les langues disponibles
Fixing the Core Drill Motor
Wear protective gloves!
Caution! When mounting the machine, risk of squashing.
Operations
In order to operate the tool safely, please observe the following notes:
Details of the work area
Keep the work area free of everything which could obstruct operations.
Provide for adequate illumination of the work area.
Adhere to the regulations concerning the power connection.
Lay the power cable in such a way that any damage by the drill can be
avoided.
Move the machine holder (2) upwards
until the locking pin (5) locks in the
2
column.
5
Remove both Allen screws M8 (3) and
take off the clamp (4).
4
3
Put the core drill (M) on the carriage and
close the clamp (4) by means of the
Allen screws (3).
15
Publicité
