Noise/Vibration Information - Bosch Professional GWS 700 Notice Originale

20 | English
Angle Grinder
– with low-vibration auxiliary
handle
– with standard auxiliary handle
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Angle Grinder
Article number
Rated power input
Power output
Rated speed
Speed adjustment range
Max. grinding disc diameter
Grinding spindle thread
Max. thread length of grinding
spindle
Speed preselection
Kickback stop
Restart protection
Starting current limitation
Weight according to EPTA-Proced-
ure 01:2014
– with low-vibration auxiliary
handle
– with standard auxiliary handle
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Noise/Vibration Information

Noise emission values determined according to
EN 60745-2-3.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 91 dB(A); sound power level
102 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-3:
Surface grinding (roughing):
2 2
a = 6.5 m/s , K = 1.5 m/s
h
Grinding with abrasive disc:
2 2
a = 3.5 m/s , K = 1.5 m/s
h
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
1 609 92A 5FM | (22.11.2019)
GWS... 700
kg 1.9
kg 1.8
/ II
GWS... 750 S
3 601 C94 3 601 C94
1..
W 750
W 380
-1
min 11,000 11,000
-1
min 2800–
11,000
mm 125
M 14
mm 22
●
–
●
●
kg 1.9
kg 1.8
/ II
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Fitting
Fitting protective equipment
Pull the plug out of the socket before carrying out any
u
work on the power tool.
Note: If the grinding disc breaks during operation or the
holding fixtures on the protective guard/power tool become
damaged, the power tool must be sent to the after-sales ser-
700 710 710
1.9 1.9
1.8 1.8
/ II / II
750 750-100 750-100 I
3 601 C94 3 601 C94
0.. 0..
750 750 750
380 380 380
11,000 11,000
– –
125 100 100
M 14 M 10 M 10
22 22
– –
– –
● –
– –
1.9 1.9
1.8 1.8
/ II / II
750 750 S
1.9 1.9 1.9
1.8 1.8 1.8
/ II / II / II
750-125 750-125
3 601 C94 3 601 C94
2.. 0.. 0..
750 750
380 380
11,000 11,000
– –
125 125
M 10 M 14
22 22 22
– –
● –
● –
● –
1.9 1.9 1.9
1.8 1.8 1.8
/ II / II / II
Bosch Power Tools
–
–
–
–
–